Electrical contractor / worker

Topics

From 2019, courtesy renewal reminders will start being sent electronically (no longer by post). Notices of expiring licences, permits and/or registrations (authorisations) will be sent as follows: 3 months before expiry, an SMS will be sent to remind you to update your details 2 months before...
Occupational licensing
Electrical apprentices I am a fourth-year electrical apprentice, am I required to obtain any first aid qualifications when I get my electrician’s licence? No. While there are no legislative requirements for electrical workers to hold any first aid qualifications, it is highly recommended, given you...
Information for industry
For the purposes of the information provided below, “mutual recognition” refers to the ability of a person who is registered in connection with an occupation in a State, Territory or New Zealand to carry on an equivalent occupation in Western Australia, subject to the provisions of the Mutual...
Occupational licensing
The risk Most pools and spas are fitted with water circulating pumps and cleaning equipment powered by electric motors. Faults can occur in these motors or in the motor’s electrical wiring. This can expose bathers to the risk of electric shock. Signs of electric shock include a tingling sensation,...
Electrical installations
The fees below are effective from 1 July 2018. Fees are reviewed annually and are subject to change. Electricity (Licensing) Regulations 1991 New application Note: Includes a non-refundable portion Electrician licence (EL) $164.85 (1 year) $534.45 (5 years) Restricted electrician licence (RE) $164...
Services
The fees below are effective from 1 July 2018. Fees are reviewed annually and are subject to change. Electricity (Licensing) Regulations 1991 New application Note: Includes a non-refundable portion Electrician licence (EL) $164.85 (1 year) $534.45 (5 years) Restricted electrician licence (RE) $164...
Services
The Western Australian Government is seeking your comments on the proposals to modernise Western Australia’s WHS laws. Background On 12 July 2017, the Government’s announcement of the development of a modernised Work Health and Safety Act for Western Australia which is based on the national model...
Work health and safety legislation reform
Information on safe working guidelines and effective supervision of electrical apprentices.
Information for industry
Information on safe working guidelines for electrical workers .
Information for industry
The roof space of your home can be a very dangerous area. There are a number of electrical risks, including: exposed live electrical conductors or wiring; unenclosed joints in conductors; electrical connections where the condition of wiring has deteriorated (often associated with older buildings);...
Electrical installations

Pages

Publications

Use this form to apply in writing for mutual recognition of your licence if you are working as a plumber, electrician, or gasfitter.
Corporate
Form – application
02 Oct 2018
Suitable for applicants who have completed the Restricted Electrical Licence System Training Record and Logbook (purple logbook).
EnergySafety
Form – application
17 Sep 2018
EnergySafety
Fact sheet
14 Sep 2018
Current Building and Energy fee schedule for electrical and gas licensing.
EnergySafety
Information
02 Aug 2018
The Western Australian Government is seeking your comments on the proposals to modernise Western Australia’s WHS laws. Background On 12 July 2017, the Government announcemed the development of a...
WorkSafe
Information
27 Sep 2018
New regulations have come into effect which requires electricity to be switched off before people enter the roof space. To assist workers in notifying homeowners of the new regulations the WorkSafe...
WorkSafe
Information
05 Jul 2018
WorkSafe is investigating an incident with preliminary evidence indicating an employee, who was fatally injured, may have been struck in the head by a 48 inch pipe wrench spanner. The spanner was...
WorkSafe
Alert
31 May 2018
This fact sheet provides information about lightning and includes duties for employers of outdoor workers and precautions to be taken to reduce the risk of injuries and deaths as a result of...
WorkSafe
Fact sheet
18 May 2018
New legislation will be coming into effect on 14 May 2018 which will require all workers performing work for reward at “domestic-type” premises, turn off all sources of electricity by opening the...
WorkSafe
Guidance note
05 Jul 2018
Manual task injuries remain one of the largest single causes of injury in the construction industry. These injuries not only cause pain and suffering to the injured worker and their families but also...
WorkSafe
Fact sheet
19 Jun 2018

Pages

Announcements

An electrician was employed by an electrical contractor engaged by the network operator to carry out work on their Advanced Metering Infrastructure (AMI) Project. The electrician was carrying out the replacement of an analogue kWh meter with a new digital kWh meter at a domestic property in Esperance. After installing the new meter, the electrician replaced the SPD to reconnect the supply...
EnergySafety
Department News
02 Nov 2018
Building and Energy urges electricians working on power transformers to exercise caution after a recent incident where electrical workers were exposed to hazardous asbsestos-containing material (ACM). In January 2018, electrical workers undertaking repairs to a high voltage (HV) power transformer which had failed, disconnected the transformer by unbolting and removing a gland plate from the base...
EnergySafety
Department News
02 Nov 2018
The Department of Mines, Industry Regulation and Safety’s inaugural Annual Report, tabled in Parliament on 19 September 2018, is now available on the website . The 2017-18 report highlights the department’s key achievements and financial performance for the last financial year and showcases what we do for the community of Western Australia. The report also includes independently audited reports...
Corporate
Department News
25 Oct 2018
Building and Energy wishes to remind you that you must use the correct postal address for all correspondence. Department of Mines, Industry Regulation and Safety Building and Energy Division Locked Bag 14 CLOISTERS SQUARE WA 6850 From Friday 24 August 2018 there is no longer a mail redirection set up. Therefore, mail sent to any previous addresses will not be received by the Licensing Boards...
Building Commission / EnergySafety
Department News
29 Aug 2018
From 30 June 2018 , DC isolating switches used in solar PV installations must comply with a Level 3 certification under the national Electrical Equipment Safety System (EESS). This means DC isolating switches must have a valid Certificate of Conformity confirming the product complies with Australian Standard AS 60947.3:2018. The brand and all relevant models must be registered to the responsible...
EnergySafety
Alert
05 Jul 2018
A series of controlled burns filmed by the Department of Fire and Emergency Services have shown how rapidly fire, smoke and toxic fumes can fill a room and turn deadly. A fire in a modern home has the potential to spread and engulf a room in under five minutes. The vision of the controlled burns demonstrates the need for Western Australians to treat home fire safety as a priority this winter by...
Consumer Protection / EnergySafety
Media release
27 Jun 2018
The 2018 edition of AS/NZS 3000:2018, Electrical Installations (known as the Wiring Rules) is now available. The new standard has been developed by Standards Australia in collaboration with industry and government. AS/NZS 3000 specifies the electrical installation safety requirements for all premises in Australia and New Zealand. The new edition is a complete revision of the 2007 edition,...
EnergySafety
Alert
26 Jun 2018
Rand Transport (1986) Pty Ltd was handed a $45,000 fine and a $2900 costs penalty in the Perth Magistrate Court following serious ammonia gas burns to a contract worker. Rand, a cold storage food distributor, pleaded guilty to failing to provide and maintain a safe workplace where contractors were not exposed to hazards. On 11 December 2014, during the construction of a dividing wall within a...
WorkSafe
Media release
30 May 2018
FGS Contracting Pty Ltd and the Director Ryan Wayne Franceschi, were fined today in the Perth Magistrate Court in relation to serious injuries caused to a 17 year old worker in Esperance. FGS Contracting Pty Ltd was fined $225,000 for failure to meet their duty to provide a safe workplace and for failing to ensure the correct high-risk work license. Additionally, Franceschi as the Director was...
WorkSafe
Media release
18 May 2018
Axedale Holdings Pty Ltd, trading as Shaw’s Cartage Contractors, was fined in relation to the deaths of two labourers. The deaths were caused by falling concrete tilt-up panels at a Perth construction site. Axedale, among three parties charged, pleaded guilty to failing to ensure the safety of workers, and that failure causing the death of Joseph McDermott and Gerard Bradley. The fine totalled $...
WorkSafe
Media release
18 May 2018

Pages

Subscribe to Topics

Applications

Forms to use when applying for or renewing an electrical licence.
EnergySafety

Renewals

To renew your electrical licence you will need: your licence number, your email address or mobile phone number that is currently recorded with Energy Safety and your credit card (Visa or Mastercard) so that you can make your payment.
EnergySafety

Notifications

Electricians and electrical contractors can notify the department about changes to contact information.
EnergySafety

Payments

To pay your electrical licence you will need: your licence number, your email address or mobile phone number that is currently recorded with Energy Safety and your credit card (Visa or Mastercard) so that you can make your payment.
EnergySafety
Subscribe to RSS - Electrical contractor / worker